• Snapper System Modules
• Modules
• Snapper CL15
• Snapper 255
• Snapper 270
• Snapper Ekit
• Rig Development Kits
• Documentation
• Terms & Conditions
• Contact
• Data Storage Solutions
• Electronic Design
• ARM Development Tools
• About Us
• Blog
• Home

Snapper 255

Snapper 255 Module

The Snapper 255 Single Board Computer Module is designed to be used as the system core in a wide range of ARM based products. It includes a high-performance ARM-based microcontroller (Intel XScale PXA255), a practical selection of peripherals, high-speed and flash memories and a powerful Altera FPGA; all integrated onto a single module no larger than a standard business card.

Snapper 255 incorporates a high-performance Intel XScale PXA255 ARM microcontroller at up to 400MHz, 64MB SDRAM, upto 512MB NAND Flash memory, 10/100T Ethernet MAC & PHY, 2x USB 2.0 OTG Host and USB 1.1 Device Ports, Serial UARTs, a selection of three Altera FPGAs (EP1C4, EP1C12 or EP1C20), a stereo audio codec and touch-screen controller, and a versatile LCD controller. In fact, the Snapper Single Board Computer Module provides basically everything you need to create a high-end embedded system.

A buffered 32-bit ARM System Bus is also brought out to external pins, allowing it to be directly interfaced to other high-performance devices (i.e. a DSP). The FPGA external interface is implemented so as to support 32-bit or 64-bit Master/Target PCI at up to 66 MHz.

To aid product development with the Snapper Single Board Computer Module, Bluewater Systems has also released the Rig 100 and Rig 200 Development Kits. These provide developers with a feature rich base board enabling the development of drivers and application software for products that are to use the Snapper 255 module. This is ideal for initial product prototyping and also allows software development to occur in parallel with hardware development.

Features and Specifications

(A full specification document is available on request from solutions at bluewatersys dot com)

• Intel Xscale Microcontroller up to 400 MHz
• 64MB SDRAM Memory
  1MB Boot Flash
  Up to 512MB Flash via xD socket
• Altera EP1C4, 12 or 20 FPGA
• Ethernet 10/100 MBit
• USB 1 x USB 1.1 Device Port
  2 x USB OTG/Host Port
• User I/O 17 CPU
  upto 123 FPGA
• UARTs 1 x full function
  1 x three wire
  1 x Bluetooth
• Infra Red IrDa
• LCD supports up to a resolution of 800 x 600, 16bit
• Phillips touchscreen controller
• ADC 4-channel input
• PCMCIA Support for upto 2 slots
• SD Card SPI - SSP
• Power 3V3 input
• Typical power consumption 1400mW
• Board Size 70mm x 40mm x 9mm*

* Includes sockets. The Snapper Single Board Computer Module requires a 9mm height between the board it connects to and anything about it.

Snapper 255 Block diagram representation

Everything to get you started

A Rig 200 kit comes with Snapper 255, a fully configured Linux kernel with driver support, a carrier board with connectors for most peripherals and comprehensive doucumentation. Using this you can get started right away on prototyping your design, with the confidence that the software provided will work essentially unmodified in your final product design.

Tested and verified schematic designs are available for connecting various Snapper 255 peripherals to the outside world on your carrier board. Footprint and schematic files are available for some popular PCB design packages to help you get started.

More information

A brochure [PDF] is available.

For more information about Snapper 255, please contact us at sales at bluewatersys dot com with information about your application. We can then provide details of the suitability of Snapper 255 for your design, and how it might accelerate development and reduce cost.