Welcome to Bluewater Systems

• Our Specialties
• Modules & Development Platforms
• Data Storage Solutions
• Consulting Services
• Electronic Design
• ARM Development Tools
• About Us
• Newsletters
• Press Releases
• White Papers
• Contact
• University Programme
• Unikit
• Hardware
• Modifications
• Software
• GNU Toolchain
• Using GNU
• Boot Loader
• uClinux
• uClinux System Info
• uClinux Progress
• Examples
• Archives / Download
• JTAG adaptor
• Other topics
• Applications
• Availability
• Pricing
• Blog
• Quick Start
• Forum
• Home

Software Archive / Downloads

This page contains links to the source code archives of the various parts of the GNU toolchain. If a link is broken, please find an alternate source and fix the links (this is a Wiki after all).

• gcc-3.3.3 main (ftp://ftp.gnu.org/gnu/gcc/releases/gcc-3.3.3/gcc-3.3.3.tar.bz2), mirror (http://www.ariusdsp.com/~gnuarm/gcc-3.3.3.tar.bz2).
• binutils-2.14 main (ftp://ftp.gnu.org/gnu/binutils/binutils-2.14.tar.bz2), mirror (http://www.ariusdsp.com/~gnuarm/binutils-2.14.tar.bz2).
• gdb-6.0 main (ftp://ftp.gnu.org/gnu/gdb/gdb-6.0.tar.bz2), mirror (http://www.ariusdsp.com/~gnuarm/gdb-6.0.tar.bz2).
• newlib-1.12.0 main (ftp://sources.redhat.com/pub/newlib/newlib-1.12.0.tar.gz), mirror (http://www.ariusdsp.com/~gnuarm/newlib-1.12.0.tar.gz).
• jtager-0.3.0 main (http://prdownloads.sourceforge.net/jtager/jtager-0.3.0.tar.gz?download).

Patches

• t-arm-elf main (/files/t-arm-elf) - configuration file for multilib-enabled arm-elf-gcc.
• thumb-3.3.3.patch main (/files/thumb-3.3.3.patch) - patch to fix ARM/Thumb support in gcc-3.3.3
• jtager-0.3.0-bws.patch main (/files/jtager-0.3.0-bws.patch) - patch to allow JTAGER to access and program the AM29LV800BB or AM29LV160DB flash on the router board.

Binary Toolchain Download

• arm-elf-tools-20030314.sh main (http://www.uclinux.org/pub/uClinux/m68k-elf-tools/arm-elf-tools-20030314.sh) - this is the toolchain to use for uClinux work in Little-Endian mode. Strongly recommended to use uClinux.
• gnu-arm toolchains (various) (list) (http://www.gnuarm.com/files.html) - a gcc-3.4 based toolchain for several different platforms (Windows/Cygwin, Linux/x86, Mac OS X), available for free download. Recommended for embedded development where uClinux is not the target.

Example Code

All Examples main (/files/examples.tar.gz) - all available examples packaged up into one file.

Utility Code

• w90n740-ram.ld main (/files/w90n740-ram.ld) - simple linker script for use with the W90N740 router board, linking to SDRAM at 0x8000.
• Makefile main (/files/ExampleMakefile) - generic makefile that you can customize for developing simple OS-less applications.

uClinux Source

Note: you will need to modify you router to Little-Endian mode to use uClinux. See HW Mods: Step Six.

• uClinux Distribution main (/files/uclinux-dev.tar.bz2) - Caution large file (~73 MB).
• uClinux Binary Images main (/files/images.tar.bz2) - download onto your router board to try it out.
• Little Endian Bootloader for uClinux main (/files/bootloader.bin) - see HW Mods: Step Six for more info.